Tag Archives: switchgear reconditioning

AKR Air Circuit Breaker

GE AKR Air Circuit Breaker Reconditioning​

GE AKR Air Circuit Breaker Reconditioning

If your facility operates older GE AKR air circuit breakers, how much longer can you keep them in service with switchgear repairs? These breakers have been used for decades in industrial and commercial power distribution, and many are still in place.

The original GE AKR series is no longer manufactured, but that doesn't mean you need to replace your existing equipment. GE AKR circuit breaker reconditioning can help you with worn components, restore mechanical performance, and verify your breakers are working as originally intended.

If you're maintaining an AKR-30, AKR-50, AKR-75, or AKR-100, the same basic principles apply. Proper inspection, maintenance, and testing can extend the electrical life of your existing equipment without replacing an entire switchgear lineup.

Understanding the GE AKR Series Air Circuit Breakers

The GE AKR series includes low-voltage air power circuit breakers designed for commercial and industrial electrical distribution systems. These breakers give overcurrent and short-circuit protection for switchboards, switchgear, and large electrical distribution systems.

One advantage of the AKR breaker design is maintainability. Many models use drawout construction, letting you remove the breaker from its compartment for inspection, testing, and servicing.

GE AKR Breaker Frames, Ratings & Applications

GE AKR BreakerFrames, Ratings,Applications
AKR-30800 ASmaller low-voltage distribution feeders
AKR-30H800 AApplications requiring higher interrupting capability
AKR-501,600 AIndustrial distribution and feeder protection
AKR-50H1,600 AHigher fault-current applications
AKRT-50H2,000 ALarger feeder and distribution applications
AKR-753,200 AMain and large feeder protection
AKR-1004,000 AHigh-capacity main distribution systems

Trip settings, interrupting ratings, and application depend on breaker configuration.

Example: GE AKR-5C-75

The GE AKR-5C-75 air circuit breaker is an electrically operated, drawout breaker in the 3,200-ampere AKR-75 frame family, associated with GE AKD-6 (and AKD-8) switchgear.

AKR breakers contain contacts, an operating mechanism, protective trip components, and insulation systems needing periodic inspection. As the breaker ages, those components may need cleaning, adjustment, repair, or replacement.

The AKR-5C-75 is a good example why reconditioning can be worthwhile. If the breaker remains structurally sound and compatible service parts are available, we can restore its operating condition rather than invest in a replacement.

Frequently Asked Questions About GE AKR Circuit Breakers

AKR Air Circuit Breaker
1. Are GE AKR air circuit breakers obsolete?

Yes. The original GE AKR series is a legacy product line. However, replacement parts, reconditioned breakers, and retrofit solutions may still be available for many models.

2. Which GE AKR breaker models can be reconditioned?

Common candidates include AKR-30, AKR-50, AKR-75, AKR-100, and certain related configurations. Reconditioning suitability depends on the condition of the specific breaker and parts availability.

3. Can a GE AKR-5C-75 breaker be reconditioned?

Yes, provided the breaker is structurally sound, serviceable parts are available, and inspection and testing confirm that it can be returned to acceptable operating condition.

4. What components are typically serviced during reconditioning?

Common components include main contacts, arcing contacts, arc chutes, operating mechanisms, springs, latches, linkages, trip devices, and control wiring.

5. Can older GE AKR trip units be upgraded?

Some AKR breakers support engineered trip-unit retrofits. The selected retrofit must be compatible with the breaker and meet the installation's protection and coordination requirements.

6. Is reconditioning less expensive than replacing a GE AKR breaker?

It can be when the breaker is in generally good condition and the existing switchgear doesn't need modification. Actual costs depend on the extent of repairs and testing.

7. How often should GE AKR breakers be serviced?

Maintenance intervals depend on operating conditions, environmental exposure, switching frequency, and equipment condition. Follow the manufacturer's recommendations and maintenance standards.

8. What testing is performed after GE AKR breaker reconditioning?

Testing includes insulation resistance, contact resistance, mechanical operation, control circuit verification, and protective trip-function testing.

Why GE AKR Breakers Need Reconditioning

Even if your breakers rarely trip, their internal components eventually wear out. Lubricants can harden, mechanical components can deteriorate, and contamination can accumulate inside the breaker. Repeated switching and fault interruptions can also cause contact wear.

  • Contact deterioration: Arcing, pitting, and erosion affect main and arcing contacts.
  • Aging lubricants: Hardened grease interferes with moving components and prevent consistent operation.
  • Mechanical wear: Springs, latches, linkages, and bearings wear or become misadjusted.
  • Insulation contamination: Dust, moisture, and other contaminants reduce insulation performance.
  • Trip system problems: Older trip devices and associated wiring require testing, repair, or modernization.

These conditions don't necessarily mean your breaker has reached the end of its useful life. With professional air circuit breaker reconditioning and maintenance you can determine which components need attention and whether continued service is practical.

The GE AKR Air Circuit Breaker Reconditioning Process

Models differ, but our basic GE AKR breaker reconditioning process follows a similar sequence.

1. Initial inspection and evaluation

The process starts with a thorough evaluation of your breaker's condition. Technicians inspect the breaker for corrosion, overheating, damaged insulation, mechanical wear, and signs of previous electrical faults.

They also review nameplate, operating mechanism, trip device, and breaker configuration to identify correct maintenance procedures.

2. Disassembly and cleaning

Once the breaker has been safely isolated and removed from service, qualified technicians disassemble components for inspection and cleaning. Accumulated dirt, old lubricants, and contaminants are removed using methods appropriate for the equipment.

This step is especially important for older breakers that have operated for years in industrial environments.

3. Contact inspection and restoration

Your breaker's contacts are among its most important components. Technicians inspect main contacts, arcing contacts, and arc chutes for wear, erosion, and damage.

Depending on condition and the manufacturer's maintenance requirements, contacts may be cleaned, adjusted, or replaced. Components that exceed acceptable wear limits should be replaced and not returned to service.

4. Operating mechanism servicing

GE AKR breakers use stored-energy operating mechanisms that need properly functioning springs, latches, linkages, and related components.

During reconditioning, technicians inspect these parts, address worn or damaged components, and apply manufacturer-approved lubrication where required. The goal is to restore consistent opening, closing, and tripping performance.

5. Trip system inspection and testing

The trip device determines how your breaker responds to overloads and short circuits.

Depending on the AKR model and installed protection system, technicians perform secondary injection, primary injection, and functional tests.

Some older AKR breakers can also be good for engineered trip-unit upgrades, giving you access to more modern protective functions.

6. Final electrical and mechanical testing

Before returning the breaker to service, technicians perform electrical and mechanical tests.

These include contact resistance measurements, insulation resistance testing, mechanical operation checks, trip-function verification, and control circuit testing. Testing helps confirm that the breaker meets the appropriate acceptance criteria before it's reinstalled.

BCS Switchgear provides switchgear reconditioning and modernization services for facilities maintaining aging electrical distribution equipment.

GE AKR Breaker Reconditioning vs. Replacement

When an older AKR breaker begins showing signs of wear, you have three basic options: Recondition, Replace, or retrofit the breaker.

Which approach makes sense depends on your equipment's condition, parts availability and your long-term electrical distribution needs.

OptionWhen to consider itPrimary benefit
ReconditioningBreaker remains structurally sound and serviceableRetains existing equipment
ReplacementMajor damage or unavailable components make repair impracticalProvides another compatible breaker
RetrofitExisting equipment needs updated protection or functionalityModernizes the installation

Reconditioning can be attractive when the existing switchgear remains in good condition. You can avoid substantial equipment modifications, preserve the original breaker compartment, and reduce the scope of an electrical shutdown.

If the breaker has extensive structural damage, critical parts are unavailable, or your electrical system requires capabilities the original breaker cannot provide, replacement or retrofitting is the better long-term solution.

For more information, see BCS Switchgear's article on reconditioned and refurbished switchgear.

Benefits of Reconditioning GE AKR Air Circuit Breakers

Extend the life of your existing equipment

A reconditioned AKR breaker provides additional years of service, depending on its condition, operating environment, and maintenance history.

Reduce equipment replacement costs

Reconditioning can be economical versus purchasing new equipment or modifying an existing switchgear lineup.

Preserve switchgear compatibility

Keeping your existing breaker can avoid mechanical and electrical compatibility issues with installing a different model.

Plan maintenance around your operations

Instead of waiting for a breaker failure, you can schedule inspections and reconditioning during planned maintenance outages.

Reduce unnecessary equipment disposal

Reconditioning allows you to continue using serviceable equipment rather than discarding large electrical assemblies too soon.

Keep Your GE AKR Circuit Breakers Operating Reliably

If you're maintaining an older GE AKR switchgear lineup, replacing every aging breaker may not be necessary.

GE AKR air circuit breaker reconditioning can help you address worn components, restore mechanical performance, and verify the condition of your equipment before returning it to service. Whether you're working with an AKR-30, AKR-50, AKR-75, AKR-100, or a specific model such as the GE AKR-5C-75, the first step is evaluating the condition of your existing equipment.

BCS Switchgear helps you explore reconditioning, replacement, and modernization options for your low-voltage electrical distribution system.

Contact BCS Switchgear to discuss your GE AKR breaker requirements and request a quote.